Petrol & diesel tuning boxes for: Car / RANGE ROVER / RR IV

Showing all 45 results

Range rover tuning boxes for model rr iv

Looking to improve and tune your Range rover RR IV? then look no further than the DTUK car tuning box. You could expect to see an increase of up to 40% more power and torque, sometimes, even more, using our plug and play petrol and diesel tuning boxes.

Find your RR IV model here...

Engine Type

Standard PS

Tuned PS

Standard Torque NM

Tunes Torque NM

View tuning products for:
2.0 P400e PHEV 4x4, 300PS/221kW, 1997 ccm
300 300 294 294
View tuning products for:
3.0 4x4, 340PS/250kW, 2995 ccm
340 365 450 485
View tuning products for:
3.0 4x4, 380PS/280kW, 2995 ccm
380 380 0 0
View tuning products for:
3.0 D 4x4, 211PS/155kW, 2993 ccm
211 256 600 690
View tuning products for:
3.0 D 4x4, 249PS/183kW, 2993 ccm
249 295 600 690
View tuning products for:
3.0 D 4x4, 258PS/190kW, 2993 ccm
258 303 600 690
View tuning products for:
3.0 D Hybrid 4x4, 292PS/215kW, 2993 ccm
292 332 700 763
View tuning products for:
3.0 D Hybrid 4x4, 306PS/225kW, 2993 ccm
306 346 700 763
View tuning products for:
3.0 D Hybrid 4x4, 340PS/250kW, 2993 ccm
340 340 0 0
View tuning products for:
4.4 D V8 4x4, 340PS/250kW, 4367 ccm
340 378 700 778
View tuning products for:
5.0 4x4, 510PS/375kW, 4999 ccm
510 535 625 673
View tuning products for:
5.0 4x4, 550PS/405kW, 4999 ccm
550 550 0 0


Let’s be honest, the tuning box market is a very hard place to negotiate around and there are a lot of claims out there that frankly just don’t add up… One thing that the team at DTUK have always been proud about is being transparent and honest with every customer we deal with.
One of these being the fact that we are a partner of DTE systems GmbH founded in 1996. We have worked with DTE since 2005 and will continue to do so as their hardware/software is some of the highest quality including over 3500 TUV approved applications. This is far superior to other companies who have approached us in regards to selling their systems.

We’re often asked why people should buy our box rather than one from our competitors. Along with our Partners in Germany we invest a lot of time and effort in testing and proving our boxes before adding then to our website.

You may find a lot of these tuning boxes sold online are very much the same product. You can often tell as they use the same components throughout a variety of different boxes in the marketplace. One of these being the connection that is made from the wiring harness to the tuning box its self. No doubt the internals are very similar also. These boxes are being sold in the UK for £350+ and can be purchased from the company manufacturing them direct for £150-£250.
You may also find that a lot of these tuning boxes only offer 1 program and 1-7 settings. Here at DTUK we have always had a selection of programs and settings to be able to choose from. On all of our push button modules we offer 3 programs and 7 settings on each of those programs. That’s a total of 21 settings on one tuning box!

Check our FAQ page to find more reasons to trust DTUK to tune your pride and joy

Another benefit that helps us stand above the rest is that our systems can be used on both analogue and digital sensored engines.
Now this might mean absolutely nothing to you and may not ever affect you in the future… BUT there are a lot of our customers that run our tuning boxes on newer lease/financed vehicles. Now if you are one of those customers who change their cars every few years or so this could be a huge benefit to you. As of yet there are only a certain few manufactures that use digital sensors, but more and more are transferring across to these. The newer VAG range (Audi, Seat, Skoda, Volkswagen) and even newer Mercedes are now starting to use these digital sensors.
These sensors go by the term SENT (Single Edged Nibble Transmission) which you may have seen mentioned on our page before and this basically means that they now take a digital signal rather than the analogue signal that has been used in previous cars for many years. A lot of other companies don’t offer this and require a brand new box that tends to retail at around £550+ to be able to work with their SENT sensored vehicles.

Listed below are all of the boxes that now have the ability to use both analogue and digital sensors;

CRD2+/ CRDT+/ CRD3+/ FSR+/ MP-T+ with Bluetooth app control.

Read some of our RR IV testimonials below...