Petrol & diesel tuning boxes for: Tractor / Case IH / Steiger

Showing all 21 results

Case ih tuning boxes for model steiger

Looking to improve and tune your Case ih Steiger? then look no further than the DTUK car tuning box. You could expect to see an increase of up to 40% more power and torque, sometimes, even more, using our plug and play petrol and diesel tuning boxes.

Find your Steiger model here...

    Engine Type

    Standard PS

    Tuned PS

    Standard Torque NM

    Tunes Torque NM

    View tuning products for:
    350 RowTrac Tier 4A, 355PS/261KW, 8710 ccm
    3554260293
    View tuning products for:
    385 Quadtrac, 390PS/287KW, 12882 ccm
    39047800
    View tuning products for:
    400 RowTrac Tier 4A, 407PS/299KW, 12882 ccm
    40749900
    View tuning products for:
    420 Tier 4F, 426PS/313KW, 12882 ccm
    42653400
    View tuning products for:
    435 Quadtrac, 441PS/324KW, 12882 ccm
    44154100
    View tuning products for:
    450 Quadtrac Tier 4A, 457PS/336KW, 12882 ccm
    45756000
    View tuning products for:
    470 Quadtrac Tier 4F, 476PS/350KW, 12882 ccm
    47659600
    View tuning products for:
    485 Quadtrac, 492PS/362KW, 12882 ccm
    49260300
    View tuning products for:
    500 Quadtrac Tier 4A, 508PS/374KW, 12882 ccm
    50862300
    View tuning products for:
    500 Quadtrac Tier 4F, 507PS/373KW, 12882 ccm
    50763500
    View tuning products for:
    535 Quadtrac Tier 3, 542PS/399KW, 14950 ccm
    5426280548
    View tuning products for:
    540 Quadtrac Tier 4F, 542PS/399KW, 12882 ccm
    54267900
    View tuning products for:
    550 Quadtrac Tier 4A, 557PS/410KW, 12882 ccm
    55769800
    View tuning products for:
    580 Quadtrac Tier 4F, 589PS/433KW, 12882 ccm
    58973800
    View tuning products for:
    600 Quadtrac Tier 4A, 608PS/447KW, 12882 ccm
    60876100
    View tuning products for:
    620 Quadtrac Tier 4F, 628PS/462KW, 12882 ccm
    62878700
    View tuning products for:
    STX 425 Quadtrac Tier 3, 431PS/317KW, 14950 ccm
    4314990436
    View tuning products for:
    STX 440 Quadtrac Tier 3, 446PS/328KW, 14950 ccm
    4465160451
    View tuning products for:
    STX 450 Quadtrac Tier 3, 455PS/335KW, 14950 ccm
    4555270460
    View tuning products for:
    STX 500 Quadtrac Tier 3, 507PS/373KW, 14950 ccm
    5075870513
    View tuning products for:
    STX 530 Quadtrac Tier 3, 542PS/399KW, 14950 ccm
    5426280548

     

    Let’s be honest, the tuning box market is a very hard place to negotiate around and there are a lot of claims out there that frankly just don’t add up… One thing that the team at DTUK have always been proud about is being transparent and honest with every customer we deal with.
    One of these being the fact that we are a partner of DTE systems GmbH founded in 1996. We have worked with DTE since 2005 and will continue to do so as their hardware/software is some of the highest quality including over 3500 TUV approved applications. This is far superior to other companies who have approached us in regards to selling their systems.

    We’re often asked why people should buy our box rather than one from our competitors. Along with our Partners in Germany we invest a lot of time and effort in testing and proving our boxes before adding then to our website.

    You may find a lot of these tuning boxes sold online are very much the same product. You can often tell as they use the same components throughout a variety of different boxes in the marketplace. One of these being the connection that is made from the wiring harness to the tuning box its self. No doubt the internals are very similar also. These boxes are being sold in the UK for £350+ and can be purchased from the company manufacturing them direct for £150-£250.
    You may also find that a lot of these tuning boxes only offer 1 program and 1-7 settings. Here at DTUK we have always had a selection of programs and settings to be able to choose from. On all of our push button modules we offer 3 programs and 7 settings on each of those programs. That’s a total of 21 settings on one tuning box!

    Check our FAQ page to find more reasons to trust DTUK to tune your pride and joy

    https://www.diesel-performance.co.uk/frequently-asked-questions/

    Another benefit that helps us stand above the rest is that our systems can be used on both analogue and digital sensored engines.
    Now this might mean absolutely nothing to you and may not ever affect you in the future… BUT there are a lot of our customers that run our tuning boxes on newer lease/financed vehicles. Now if you are one of those customers who change their cars every few years or so this could be a huge benefit to you. As of yet there are only a certain few manufactures that use digital sensors, but more and more are transferring across to these. The newer VAG range (Audi, Seat, Skoda, Volkswagen) and even newer Mercedes are now starting to use these digital sensors.
    These sensors go by the term SENT (Single Edged Nibble Transmission) which you may have seen mentioned on our page before and this basically means that they now take a digital signal rather than the analogue signal that has been used in previous cars for many years. A lot of other companies don’t offer this and require a brand new box that tends to retail at around £550+ to be able to work with their SENT sensored vehicles.

    Listed below are all of the boxes that now have the ability to use both analogue and digital sensors;

    CRD2+/ CRDT+/ CRD3+/ FSR+/ MP-T+ with Bluetooth app control.

    Read some of our Steiger testimonials below...